The name system 13 stands for a modular system of solenoid coils, armature systems, solenoid operators and solenoid valves. The diameter of the armatures of all valve components is approximately 13 mm. This value is the major characteristic of this type series. The components’ efficiency has been increased to the optimum in years of simulation, construction and practical testing. Since the diameter of the armature is a major determining factor, its selection is of great technical importance.

Further details can be found in our catalog Page Catalogues

Solenoid Coil, 30 mm, DIN EN 175301-803-A, Thermoset

Solenoid Coil

Width:30 mm
Connection type:form
A - EN 175301-803-A
Moulding material:thermoset resin
DETAILS
Solenoid Coil, 30 mm, DIN EN 175301-803-A, Thermoplast

Solenoid Coil

Width:30 mm
Connection type:form
A - EN 175301-803-A
Moulding material:thermoplastic
DETAILS
Solenoid Coil, 36 mm, DIN EN 175301-803-A, Thermoset

Solenoid Coil

Width:36 mm
Connection type:form
A - EN 175301-803-A
Moulding material:thermoset resin
DETAILS
Solenoid Coil , 36 mm, DIN 175301-803-B ISO6952, Thermoplast

Solenoid Coil

Width:36 mm
Connection type:form
A - EN 175301-803-A
Moulding material:thermoplastic
DETAILS
Armature Assembly, 2/2- und 3/2 Way,M-20-Metallgewinde

Armature Assembly GW (THREAD)

Switching function:2/2 and 3/2 way
De-energized state:NC (normally closed), NO (normally open)
DETAILS
Armature Assembly, Flange (with O-ring), normally closed (nc), 2/2- und 3/2 Way

Armature Assembly FL (FLANGE)

Switching function:2/2 and 3/2 way
De-energized state:NC (normally closed)
DETAILS
Valve System CNOMO, normally closed (nc), 3/2 Way Pilot-Solenoid Valve, Zink-Pressureguss

Valve System CNOMO

Switching function:3/2 way
De-energized state:NC (normally closed)
Valve body:Zinc die-casted
Armature Guide:stainless steel
DETAILS
Loading