The name system 6 stands for a modular system of solenoid coils, armature systems, solenoid operators and solenoid valves. The diameter of the armatures of all valve components is approximately 6 mm. This value is the major characteristic of this type series. The components’ efficiency has been increased to the optimum in years of simulation, construction and practical testing. Since the diameter of the armature is a major determining factor, its selection is of great technical importance.

Further details can be found in our catalog (PDF)

Solenoid Coil, 16,5 mm, form C – EN 175301-803-C, thermoset resin

Solenoid Coil

Width:16,5 mm
Connection type:form C – EN 175301-803-C
Moulding material:thermoset resin
DETAILS
Solenoid Coil, 16,5 mm, form C – EN 175301-803-C, thermoplastic

Solenoid Coil

Width:16,5 mm
Connection type:form C – EN 175301-803-C
Moulding material:thermoplastic
DETAILS
Solenoid Coil, 16,5 mm, flying leads, thermoplastic

Solenoid Coil

Width:16,5 mm
Connection type:flying leads
Moulding material:thermoplastic
DETAILS
Armature Assembly FL, 2/2 and 3/2 way, NC (normally closed), flange

Armature Assembly FL

Switching function:2/2 and 3/2 way
De-energized state:NC (normally closed)
Connection type:flange
DETAILS
Valve System SF, 3/2 way,NC (normally closed), plastics

Valve System SF

Switching function:3/2 way
De-energized state:NC (normally closed)
Valve body:plastics
DETAILS
Valve System KR, 3/2 way, NC (normally closed), plastics

Valve System KR

Switching function:3/2 way
De-energized state:NC (normally closed)
Valve body:plastics
DETAILS
Loading