The name system 8 stands for a modular system of solenoid coils, armature systems, solenoid operators and solenoid valves. The diameter of the armatures of all valve components is approximately 8 mm. This value is the major characteristic of this type series. The components’ efficiency has been increased to the optimum in years of simulation, construction and practical testing. Since the diameter of the armature is a major determining factor, its selection is of great technical importance.

Further details can be found in our catalog Page Catalogues

Solenoid Coil, 22 mm, industry form, thermoset resin

Solenoid Coil

Width:22 mm
Connection type:industry form
Moulding material:thermoset resin
DETAILS
Solenoid Coil, 22 mm, industry form, thermoplastic

Solenoid Coil

Width:22 mm
Connection type:industry form
Moulding material:thermoplastic
DETAILS
Solenoid Coil, 22 mm, form B – EN 175301-803-B, thermoset resin

Solenoid Coil

Width:22 mm
Connection type:form B – EN 175301-803-B
Moulding material:thermoset resin
DETAILS
Solenoid Coil , 22 mm, form B – EN 175301-803-B, thermoplastic

Solenoid Coil

Width:22 mm
Connection type:form B – EN 175301-803-B
Moulding material:thermoplastic
DETAILS
Solenoid Coil, 22 mm, M 12 metal thread, thermoset resin

Solenoid Coil

Width:22 mm
Connection type:M 12 metal thread
Moulding material:thermoset resin
DETAILS
Solenoid Coil, 22 mm, flying leads, thermoplastic

Solenoid Coil

Width:22 mm
Connection type:flying leads
Moulding material:thermoplastic
DETAILS
Solenoid Coil, 30 mm, form A – EN 175301-803-A, thermoset resin

Solenoid Coil

Width:30 mm
Connection type:form A – EN 175301-803-A
Moulding material:thermoset resin
DETAILS
Solenoid Coil, 30 mm, form A – EN 175301-803-A, thermoplastic

Solenoid Coil

Width:30 mm
Connection type:form A – EN 175301-803-A
Moulding material:thermoplastic
DETAILS
Solenoid Coil, 30 mm, M 12 metal thread, thermoset resin

Solenoid Coil

Width:30 mm
Connection type:M 12 metal thread
Moulding material:thermoset resin
DETAILS
Solenoid Coil, bayonet (connector DIN 72585), thermoplastic

Solenoid Coil

Width:30 mm
Connection type:bayonet (connector DIN 72585)
Moulding material:thermoplastic
DETAILS
Armature Assembly, 2/2 and 3/2 way, NC (normally closed), thread M 12 x 0,5

Armature Assembly GW (THREAD)

Switching function:2/2 and 3/2 way
De-energized state:NC (normally closed)
Connection type:thread M 12 x 0,5
DETAILS
Armature Assembly FL, NC (normally closed), NO (normally open), flange

Armature Assembly FL

Switching function:2/2 and 3/2 way
De-energized state:NC (normally closed), NO (normally open)
Connection type:flange
DETAILS
Valve System CNOMO, 2/2 and 3/2 way, NC (normally closed), NO (normally open)

Valve System CNOMO

Height:22 mm
Switching function:2/2 and 3/2 way
De-energized state:NC (normally closed), NO (normally open)
DETAILS
Valve System CNOMO, 22 mm, 3/2 way, 2/2 way possible with accessoires, NC (normally closed), NO (normally open

Valve System CNOMO

Height:22 mm
Switching function:3/2 way, 2/2 way possible with accessoires
De-energized state:NC (normally closed), NO (normally open)
DETAILS
Valve System CNOMO, 30 mm, 3/2 way, 2/2 way possible with accessoires, NC (normally closed)

Valve System CNOMO

Height:30 mm
Switching function:3/2 way, 2/2 way possible with accessoires
De-energized state:NC (normally closed)
DETAILS
Valve System KR, 3/2 way, NC (normally closed), NO (normally open), concentric O’rings (KR) sealing material FPM

Valve System KR

Switching function:3/2 way
Connection type:NC (normally closed), NO (normally open)
Gasket of the pneumatic interface:concentric O’rings (KR) sealing material FPM
DETAILS
Valve System GKR, 3/2 way, NC (normally closed), NO (normally open), internal exhaust sealing material FPM

Valve System GKR

Switching function:3/2 way
De-energized state:NC (normally closed), NO (normally open)
Gasket of the pneumatic interface:internal exhaust sealing material FPM
DETAILS
Valve System FL, 3/2 way, NC (normally closed), NO (normally open, O’rings, asymmetrical (FL) sealing material FPM

Valve System FL

Switching function:3/2 way
De-energized state:NC (normally closed), NO (normally open)
Gasket of the pneumatic interface:O’rings, asymmetrical (FL) sealing material FPM
DETAILS
Loading